emProbe
embedded Probe.
Since R2019b
Library: embeddedCreatorLib ( Dafulai Electronics) / Modbus Slave & Debugger / emProbe
Description
This block will watch Simulink signal. Input Port connects Signal you want to watch. Output Port connects block "Display" to display signal values
Notes: 1 Not all signals need "emProbe" to watch. For signal from port with ""Right Arrow" (à) symbol, you can directly connect block "Display" to watch them.
2 You can use block "Mux" to collect multiple signals, and then use one "emProbe" to watch. This way can save communication traffic, and all signals values are simultaneous.
Parameters
None
Ports
Input
| • | — Any data type's scalar or vector. You connect it to any Simulink Signal you want to watch. |
Outport
| • | — The same as input port's signal. It connects block "Display" to watch signal values. |